List $658+

Item # UFE-1163   $350

Full Image

ITW Model 12" Disc Sander

Provides true corners...

Units are in Good Working Condition.

There Are 0 Units Available

The photo to the left is not of the actual sander, but is representative in quality and likeness to one you will receive.

This item can be picked up in the Delaware, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Tom-DE-10-14-10

JP-Sold 2-7-11      Return Home

*** Reduced *** Item # UFE-1164   $ 1,995

Full Image

Pistorius EMN-12 Double Miter Saw

This machine is in Good Working condition. Includes measuring table, and dust collection system .

Manufactured:  1998       Serial #  86496

Information below is from manufacturer's website http://www.pistorius.com/emn.html on the newest model. Call tech support for exact specifications that may differ :

MITERING: MODELS EMN-12 and EMN-14

Foot or Air operated double miter cut-off saws. Extremely versatile. Sawblades will cut nearly any material in one cycle of the sawheads, not repeated chopper-like passes. Each cut is a finish cut suitable for assembly. No material supports are necessary as no pressure is exerted against the work piece. This machine will easily cut through any flat shape, and with no fixturing, will handle small reverses and shell-type mouldings.

Features:

• 230 volt, 1 phase electrics standard. No expensive electrical installation required.
• Simple and effortless to use. Employee’s become very efficient and accomplished at operating this machine.
• Side scrap-discharge chute keeps scrap away from operator. Simple disposal into container.
• Machine is virtually maintenance free, eliminating costly downtime. Keeping blades sharp is your only requirement for continuous trouble free operation.
• Complete line of gages and quality carbide sawblades available.
• Manual model does not require compressed air.

This item can be picked up in the Delaware, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Tom-DE-10-14-10 $2,495 / 12-15-10 $1,995

Sold 1-13-11   Return Home

(List price new $2,300)

Item # UFE-1165  $ 1,095

Full Image

Cassese C S89

Air-Operated / Pneumatic Under-pinner

This unit is in Good Working Condition. Include are some nails.

Manufactured: 2000

Here is a video on how to operate the C S89 (copy & paste in address bar) www.youtube.com/watch?v=n1rphLtEBO0

This item can be picked up in the Delaware, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Tom-DE-10-14-10

Sold 1-14-10     Return Home

Replacement $2,748 List Price

Item # UFE-1166   $975

Full Image

Mitre Mite VN2

Mitre Mite VN2  V-Nail Frame Assembly Machine

This unit is in Good Condition. Includes accessories as shown: 7mm, 10mm, and 15mm heads. This is the earlier generation to the VN2+1.

Manufactured: pre 1990

The following information is from the ITW AMP / Manufacturer's website: Contact manufacturer to determine what may be different between the VN2 & VN2+1.

The Mitre-Mite VN 2+1 is a bench top frame assembly machine and our most popular model with the Custom Framer. It is compact and well constructed, built for many years of trouble free operation. With this machine, the Framer sets the front and back stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails can be driven or stacked anywhere along the frame joint. Other features include a pneumatic load / feed system to eliminate jams, "soft clamp" pneumatics for damage free joints, and a "quick change" hold down to fit most profiles.

Specifications:
Machine Size: Width/12" , Length/19" , Height/14" , Weight/75lbs
Power Source: Pneumatic
Framing Capability: Frame Width 3/8" to 5" / Frame Height 1/4" to 5 1/4"
V-Nail sizes: 3,5,7,10,12,15 mm

This item can be picked up in Michigan, or shipped for an additional fee by common carrier. Shipping is not the $6.50 default on the order page.

Terry-MI-10-15-10

Sold 11-6-10    Return Home

  *** Price Reduction  Item # UFE-1167   $500

Full Image

Phaedra Miter-Grids

 Phaedra Measuring System with attachments as shown

Measuring system for use with compound miter saw

See page #116 for Current Information

This item can be picked up in California, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Lisa-CA-10-15-10 $600 / 1-18-11 $500

No Longer Available      Return Home

Replacement $3,200 List Price

Item # UFE-1168   $ 1,495

Full Image

Gerlich-GunnArt Bucmatic Underpinner N series N-1230

Swiss Made - V-Nail Frame Assembly Machine

This unit is in Good Condition. Includes accessories as shown.

Manufactured: 2000

See page #116 for Current Information

This item can be picked up in California, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Lisa-CA-10-15-10

No Longer Available       Return Home