Used Framing Equipment:  Mat Cutters, Moulding Cutting & Joining Equipment, Mounting Presses, Hand Tools

We buy & sell pre-owned picture framing equipment. We also help you to sell your used framing equipment, and help you save on equipment that you may need. All Items are sold "As Is".  Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to crosscheck information with seller or manufacturer regarding descriptions that appear in this catalog.

Do you have Questions?  Feel free to our office at 330-405-9421 or email us at info@skylinepictures.com

                      Pre-owned Framing Equipment     page 181   

Section 2: Frame Moulding Cutting, Joining Equipment, Miter Saws (Note: newest listings appear on latter pages)

Skip to Page:  #1 -  #2  -  #3  -  #4  #5 -  #6 -  #7 -  #8 -  #9  #10 -  #11  #12  #13 -  #14 -  #15 -  #16 -  #17 -  #18 - #19 -  #20  -  #21 -  #22 -  #23  #24  #25 - 

#26 -#27  #28  #29  #30 -  #31 -  #32 -  #33  #34 -  #35 -  #36  #37  #38 -  #39 -  #40 -  #41  #42 -  #43 #44 -  #45  #46  #47 -  #48  #49 -  #50 -  #51 - 

#52  #53 -  #54 -  #55 -  #56  #57  #58  #59  #60 -  #61 -  #62-  #63 #64-  #65 #66 #67 #68-  #69 #70-  #71-  #72 #73-  #74-  #75 #76-  #77-  #78 - #79 -#80 -

-#81 -#82 -#83 -#84  -#85 -#86 -#87 -#88 -#89 -#90 -#91 -#92 -#93 -#94 -#95 -#96 -#97 -#98 -#99 -#100 -#101 -#102 -#103 -#104 -#105 -#106 -#107 -#108 -#109 -

#110 -#111 -#112 -#113 -#114 -#115 -#116 -#117 -#118 -#119 -#120 -#121 -#122 -#123 -#124 -#125 -#126 -#127 -#128 -#129 -#130 -#131 -#132 -#133 -#134 -#135 -#136 -#137 -#138 -#139 -

#140 -#141 -#142 -#143 -#144 -#145 -#146 -#147 -#148 -#149 -#150 -#151 -#152 -#153 -#154 -#155 -#156 -#157 -#158 -#159 -#160 -#161 -#162 -#163 -#164 -#165 -#166 -#167 -#168 -#169

-#170 -#171 -#172 -#173  -#174  -#175 -#176 -#177 -#178 -#179 -#180 -#181 -#182 -#183 -#184 -#185 -#186 -#187 -#188 -#189 -#190 -#191 -#192 -#193 -#194 -#195 -#196 -#197 -#198 -#199

-#200-#201 -#202 -#203 -#204 -#205 -#206 -#207 -#208  -#209 -#210 -#211 -#212 -#213 -#214 -#215 -#216 -#217 -#218 -#219 - #220  -#221- #222-#223-#224-#225-#226-#227-#228-#229-#230-

-#231-#232-#233-#234-#235-#236-#237-#238-#239-#240-#241-#242-#243-#244-#245-#246-#247-#248-#249 -#250-#251-#252-#253-#254-#255-#256-#257-#258-#259-#260-#261-#262-#263

-#264-#265-#266-#267-#268-#269-#270-#271-#272-#273-#274-#275-#276-#277-#278-#279-#280-#281-#282-#283-#284-#285-#286-#287-#288-#289-#290-#291-#292-#293

-#294-#295-#296-#297-#298-#299-#300-#301-#302-#303-#304-#305

All Items On This Page are Sold - See Latter Pages For Newest Listings

 

***Reduced***Item # UFE-1230   $2,895

Full Image

CTD D45A Double Miter Saw

This machine is in Good Working Condition. This machine has been well maintained. It is currently used to cut metal mouldings.

Below is information from Manufacturer's Website. Check with Tech Support for any differences between what is being sold and the newer generation machines.

 

From Manufacturer's Website:

 

CTD D45AX Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

 

Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD

 

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

  

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

  

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

  

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

  

Table Height: 34-1/2 (88cm) from floor.

  

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

 

  • Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
     
  • Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
     
  • Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
     
  • Actuation: Pneumatic foot valve with cover
     
  • Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
     
  • Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

This item can be picked up in California or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Joseph-CA-2-4-11 $3,350 / 1-25-12 $2,995 / 8-17-12 $2,895 s

See Page #204 for Current Information    Return Home

 

 *** Reduced *** Item # UFE-1245   $5,270

Full Image

OMGA Double Miter Saw Model 813P

This machine is in Good Working Condition.

Double miter saw with (2) saw heads fixed at 45

(2) 4 HP - 3,200 RPM motors

16" Diameter Saw Blaces

Max. cutting width 4-1/8", Max. cutting height 4"

Two-hand push-button switch.

(2) laterally-adjustable pneumatic vertical hold-down clamps.

Patented finger assembly that automatically conforms to the material profile eliminating all "front-to-back" adjustments.

2" x 3" rear-exiting central waste chute.
 

This item can be picked up in Canada, or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Justin-MK-2-17-11 $5,950 / 2-18-11 $5,495 / 1-25-12 $5,275 / 8-17-12 $5,270 s

Sold-6-2-15-Justin    Return Home

***Reduced***Item # UFE-1250   $ 1,450

Full Image

CTD 50 10" Double Miter Saw

This unit is in Good Working Condition

Comes with 6' steel ruled fence and mister

Serial # 366

From the seller "The CTD saw is a D50; both blades come down at the same time.... I have the manual for the CTD, they are 10 inch blades and the side arms are both 60 inches. The serial number is 366."

 

 

This item can be picked up in the Arizona, or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

David-AZ-2-19-11 $1,500 / 1-25-12 $1,475 / 8-17-12 $1,450 s

MV-Sold-6-12-14     Return Home

 

$ 1,399 List Price

 ***Reduced***Item # UFE-1545   $625

Full Image

INMES Underpinner

Pneumatic Underpinner

This machine is in Good Condition.

 

This item can be picked up in Tennessee or shipped for an additional fee by UPS. Shipping is not the $6.50 default found in the shopping cart.

Dan-TN-2-7-12 $650 / 8-17-12 $625 s

No Longer Available  Return Home

 

***Reduced***Item # UFE-1478   $ 4,575

Full Image

ITW AMP VN42 Underpinner

ITW AMP VN42 V-Nail Frame Assembly Machine

These units are Brand New Machines.

There are two brand new  machines available. They have been refurbished  by the manufacturer.  Each machine comes with a 2 year warranty from the manufacturer; 1 year parts.

These may have some cosmetic irregularities or scratches. Call for more information

Following info / specifications are from manufacturer's or Distributors website:

The Mitre-Mite VN 42 has been designed for ease of operation and is particularly well suited for assembling larger frames. This machine comes with a height adjustable base and has a convenient tilt / roll feature which allows for easy movement around the shop. it can be operated from the front or back and has a dual stage foot pedal which allows the Framer to see if the corner is properly aligned before nailing. After the Framer sets the stops, the hand lever is then used to position the nail head for driving or stacking V-Nails anywhere along the frame joint.

Specifications:

  • MACHINE SIZE:
    • Width 14"
    • Length 19"
    • Height 33" to 43"
    • Weight 150 lbs.
  • POWER SOURCE: Pneumatic
  • FRAMING CAPABILITY:
    • Frame Width 3/8" to 5 1/2"
    • Frame Height 1/4" to 41/2"
    • Tilt/Angle fence for custom fit
    • 4 , 6, or 8 sided frames.
  • V-NAIL SIZES: 3, 5, 7, 10, 12, 15 mm
  • OPTIONAL ACCESSORIES:
    • Wood support table
    • Metal extension wings


 

This item can be picked up in Illinois or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

ITW-IL-11-8-11 $4,675 / 2-8-12 $4,595 / 8-17-12 $4,575 s

 No Longer Available  Return Home

   ***Reduced***Item # UFE-1460  $1,450

Full Image

Pistorius VNB Frame Joiner

This unit is in Good Condition.

This item can be picked up in Michigan or shipped for an additional fee. Shipping is not the $6.50 default on the order page.

Brandi-MI-10-13-11 $1,495 / 2-8-12 $1,475 / 8-17-12 $1,450 s

Sold-10-12-12-Brandi  Return Home

wpe3F.jpg (1396 bytes)Click Arrow For Next Page

RETURN TO FRAMING EQUIPMENT

CLICK HERE FOR AIM's CATALOG INDEX OF SKYLINE, STADIUM, AND SPORTS PRINTS - WHOLESALE SUPPLIER TO GALLERIES AND FRAME SHOPS 

We Accept: Visa/MasterCard/Discover/Debit/Certified Check or Money Order

 Produced By: A.I.M. Enterprises, Inc. Phone: 330-405-9421
Copyright 2015 All rights in all media reserved.

 

Pistorius Precision Mitre Chopper, Mitre-Mite VN-4L Underpinner V-nailer Frame Assembly Machine, Frame Square Fillet Trim Chopper Cutter Trimmer, Ingersoll Rand Air Compressor, Fillet Trim Chopper Cutter Trimmer, Jyden Chopper with extra blades For Sale, Buy Used Framing Frame Shop Equipment Store, Selling Sell Your Framing Equipment, Buy Used Framing Equipment, Discount Framing Equipment, AIM Enterprises Inc Dealer Distributor Supplier of Used Framing Equipment Phone 330-405-9421