Item # UFE-160   $750

Full Image

Jun-Air Model 6-25 Compressor

It is extremely quiet.

This unit is 2 years old coming from a small frame shop which recently closed. It is in Excellent Condition.

This is an excellent unit to run your underpinner / joiner or other pneumatic framing equipment.

manufacturer's website for specifications:  http://www.jun-air.com/sw1386.asp

This item can be picked up in the Maryland area, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

GLENN-MD-6-17-09

Sold-HOLLIS7-17-09   Return Home

(List price new $4,343.90)

Item # UFE-161   $2,500

Full Image

ITW / AMP  Mitre Mite VN4L ( Long Stroke ) Underpinner

ITW Pneumatic Under-pinner / V-Nailer / Floorstand Included

Air Operated with Foot Pedal

..... Used to assemble wider frames up to 6 1/2"

This unit comes from a framing shop which closed 1 year ago.  Bought new, ... Underpinner is only 2 years old, was used for 1 year in a small volume frame shop, and has been in storage for the past year. It is in Excellent Condition....

Following info / specifications are from manufacturer's or Distributors website:

This Machine can precisely insert or stack V-Nails into the same corner positions frame after frame.  After the framer sets the stops (up to 3 nail positions per corner), the V-Nails are then driven at the correct positions along the frame joint by simply touching the hand lever and stepping on the foot pedal. Other features include a pneumatic load / feed system to eliminate jams, "soft clamp" pneumatics for damage free joints, and a "quick change" hold down to fit most profiles.

Specifications:

• MACHINE SIZE:
  • Width 14"
  • Length 25"
  • Height 14"
  • Weight 113 lbs.
• POWER SOURCE: Pneumatic
• FRAMING CAPABILITY:
  • Frame Width 3/8" to 6 1/2"
  • Frame Height 1/4" to 5 1/4"
  • Tilt/Angle fence for custom fit
  • 4 , 6, or 8 sided frames.
• V-NAIL SIZES: 3, 5, 7, 10, 12, 15 mm
• OPTIONAL ACCESSORIES:
  • Wood support table
  • Metal extension wings

This item can be picked up in Cleveland Area or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

RANDY-OH- 6-26-2009

Sold 10-10-09  Return Home

(List price new $2,300)

Item # UFE-162  $1,100

Full Image

Cassese C S89

Air-Operated / Pneumatic Under-pinner

This unit is in very good condition... Bought new in mid 1990's .. used in a mom & pop framing shop until it closed in 2003. It has been in storage ever since.

Included is are boxes of emails and a maintenance kit.

Here is a video on how to operate the C S89 (copy & paste in address bar) www.youtube.com/watch?v=n1rphLtEBO0

This item can be picked up in the Cleveland / Akron, Ohio area, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Baldwin-OH-6-30--09

Sold 9-10-09     Return Home

   Item # UFE-163   $575

Full Image

Double Dewalt 10" Compound Mitre Saws w/ Phaedra Miter-Grid

 This machine is in good working condition.

Dewalt 10" Saws / Phaedra Measuring System as shown

This item can be picked up in the Florida area, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

WES_FL--6-30-09

Sold-WES7-13-09    Return Home

(List price new $2,300)

*** Price Reduced Item # UFE-164  $1,435

Full Image

Cassese C S89

Air-Operated / Pneumatic Under-pinner

This unit is in Excellent Condition... It was rebuilt 2 years ago, shortly after which time the frame shop closed.

Included are 4 unopened boxes of nails, and several individual sleeves of nails as show.

Here is a video on how to operate the C S89 (copy & paste in address bar) www.youtube.com/watch?v=n1rphLtEBO0

This item can be picked up in the Winston Salem, North Carolina area, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

TODD-NC-6-30--09 1450 / Price Reduction  4-23-10 1435

Sold 10-22-10  Return Home

$2,748 List Price

Item # UFE-165   $700

Full Image

Mitre Mite VN2+1

Mitre Mite VN2+1  V-Nail Frame Assembly Machine

This is underpinner is in good condition

This unit comes from a framer who went out of business. Unit is about 14 years old. It comes with a stand. Makair MAC1000 135 PSI Air Compressor is also included with this purchase.

The following information is from the ITW AMP / Manufacturer's website:

The Mitre-Mite RN 2+1 is a bench top frame assembly machine and our most popular model with the Custom Framer. It is compact and well constructed, built for many years of trouble free operation. With this machine, the Framer sets the front and back stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails can be driven or stacked anywhere along the frame joint. Other features include a pneumatic load / feed system to eliminate jams, "soft clamp" pneumatics for damage free joints, and a "quick change" hold down to fit most profiles.

Specifications:
Machine Size: Width/12" , Length/19" , Height/14" , Weight/75lbs
Power Source: Pneumatic
Framing Capability: Frame Width 3/8" to 5" / Frame Height 1/4" to 5 1/4"
V-Nail sizes: 3,5,7,10,12,15 mm

This item can be picked up in Florida area or shipped for an additional fee by freight company. Shipping is not the $6.50 default on the order page.

Brown-FL- 7-13-2009

Sold-Brown-8-25   Return Home