Replacement List $3,500

Item # UFE-1253  $995

Full Image

Cassese 486 Underpinner  V-Nailer

Air-Operated / Pneumatic Under-pinner

This machine is in good working condition

Manufactured: about 1996-1997

Please see the below link for information from the manufacturer:

http://www.cassese.com/manuels/old-ancien/486/Eng-CS486.pdf

This item can be picked up in Wisconsin, or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Scott-WI-2-22-11

Sold-12-20-11      Return Home

Item # UFE-1254   $ 950

Full Image

Framers Corner Mite Guillotine SM1 Chopper

This unit is in Very Good Working condition ... w/  measuring arm

From the Seller: "Framers Corner Mite Guillotine SM1 was purchased the end of 2005 new. It comes with right and left side extension arms (with a scale and stops on the right side), Two sets of cutters, (the ones in the machine (still in excellent condition), and 2nd set of cutters still in original package, (never used). Serial number was 1965.."

 Stable, safe and unique machines. These miter machines are top-professional machines for cutting frames and moldings. They ensure perfect, accurately cut surfaces, and can be used to process both soft woods and hardwoods. After cutting, work pieces need no further treatment or preparation before joining. Creating perfect picture frames requires state of the art miter machine. This chopper is an excellent machines.

Max cut width: 4"    Max cut height 6"

63” max cutting length
290 LB
Total size 84” x 24” x 46”
Acrylic blade guard
Second set of blades in caddy for sharpening
Foot operated, no electricity
30” left hand extension table

This item can be picked up in the New York, or shipped for an additional fee by  a freight company. Shipping is not the $6.50 default on the order page.

Reni-NY-2-25-11

JP-Sold-3-23-11   Return Home

**Reduced**Item # UFE-1255   $500

Full Image

Ryobi 10" Compound Mitre Saws w/ Clearmount Miter-Grid

This saw / measuring system is in good condition.

From the Seller: "Chop Saw-Ryobi 10" carbide blade, measuring stop (fences) by Clearmount 42". Could use a new switch on saw as it's getting a little sticky."

Ryobi Compound Saw / Clearmount Measuring System as shown.

This item can be picked up in the Colorado, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Cookie-CO-2-25-10

See page #121 for Current Information      Return Home

Item # UFE-1256   $12,500  Sold-1-23-12-Fred   

Item UFE-1256b (10 available) Spare Foil Wheels (Each)  $150   Sold-1-23-12-Fred   

Full Image

Delle Vedove 5-head Hot Tape Foiler

Machine is in Very Good Condition. Includes 2 emboss head -   leister hot wind heat guns  ($850  new )

Manufactured: 12 / 1997

From the seller : "I’ve included some pictures of individual foil-heads to further indicate the quality of the machines. As you can see from these pictures, the joy-stick controls are very clear and user-friendly:& the X and Y controls front-to-back and up-and-down, while the Z controls rotation. Given this level of control, it’s even possible to run the foil-heads in the horizontal position to decorate the side of the moulding"
 

This item can be picked up in Wisconsin or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Fred-WI-2-28-11

   Return Home

Item # UFE-1257   $17,500  Sold-1-23-12-Fred 

Item UFE-1256b (10 available) Spare Foil Wheels (Each)  $150   Sold-1-23-12-Fred   

Full Image

Delle Vedove 8-head Hot Tape Foiler

Machine is in Very Good Condition. Includes 2 emboss head -   leister hot wind heat guns  ($850  new )

Manufactured: 12 / 1997

From the seller : "I’ve included some pictures of individual foil-heads to further indicate the quality of the machines. As you can see from these pictures, the joy-stick controls are very clear and user-friendly:& the X and Y controls front-to-back and up-and-down, while the Z controls rotation. Given this level of control, it’s even possible to run the foil-heads in the horizontal position to decorate the side of the moulding"
 

This item can be picked up in Wisconsin or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Fred-WI-2-28-11

   Return Home

List $35,000 +

Item # UFE-1258  $ 4,995

Full Image

Computerized Electro Mechanical Guillotine Moulding Chopper

This is a production environment machine; uses Morso Blades. There are 4 machines available.

This unit is in Good Working condition.

From the seller " We will ensure that each machine ships in full plug-and-play mode."

Description from the seller:1 – The machine is manufactured by BQ Precision Engineering, LTD located in the UK.

 2 – We have four (4) machines total, and all of them are from either 1998 or 1999.

 3 – The chopper blades themselves are Morso brand, and are clearly stamped with a Morso part number. 

4 – The machine is electro-mechanical as opposed to pneumatic, i.e. the blades are actuated via an electric motor that turns a mechanical crankshaft. 

5 – The user has the option of running the machine in a lower-volume manual mode or a higher-volume automated mode (we would pre-configure the machine to the buyer’s preference prior to shipping).

 6 – We have a full manual set, and would provide both digital and hard copies to the buyer.

 7 – We have a large supply of spare parts, as well as a number of complete spare electronic control cabinets.  Our plan would be to ship a minimum of 1 to 2 extra control cabinets with each machine. 

8 – The maximum size moulding that the machine can handle is 3” wide x 1 Ύ” high. 

9 – Power requirements are 480V/3 Phase.

This item can be picked up in Wisconsin or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Fred-WI-2-28-11

Sold-1-23-12-Fred    Return Home