**Reduced**Item # UFE-1247   $2,995

Full Image

OMGA Double Miter Saw Model 813P

This machine is in Good Working Condition.

Double miter saw with (2) saw heads fixed at 45° (2) 4 HP - 3,200 RPM motors 16" Diameter Saw Blaces Max. cutting width 4-1/8", Max. cutting height 4" Two-hand push-button switch. (2) laterally-adjustable pneumatic vertical hold-down clamps. Patented finger assembly that automatically conforms to the material profile eliminating all "front-to-back" adjustments. 2" x 3" rear-exiting central waste chute. See page #120 for Current Information

This item can be picked up in the North Carolina, or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Justin-MK-2-19-11

Sold-2-13-12-Justin   Return Home

List $3,400

Item # UFE-1248  $ 800

Full Image

Morso-F Chopper

This unit is in Good Working Condition.

 Included: a 60" extended measuring rail with support stand, and an extra set of blades..

Serial # 14,919  Manufactured: 1974

This item can be picked up in the Arizona, or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

David-AZ-2-19-11

Sold 1-25-12-David   Return Home

   Item # UFE-1249   $ 595

Full Image

12" Miter Disc Sander

Miter "Correcto" Sander - Barton Model FR-00 1HP.  Includes: stand, extra disc & shop vacuum

This machine is in good working condition.

From the seller: "  The sander is a Barton Miter Correcto Sander, Model FR-00 with stand. We bought new and used it for about 5 years. I have the manual and in the pic there is a new sanding disc on the shelf under the sander. "

This item can be picked up in the Arizona, or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

David-AZ-2-19-11

JP-Sold-3-11-11   Return Home

**Reduced**Item # UFE-1250   $ 1,500

Full Image

CTD 50 10" Double Miter Saw

This unit is in Good Working Condition

Comes with 6' steel ruled fence and mister

Serial # 366

From the seller "The CTD saw is a D50; both blades come down at the same time.... I have the manual for the CTD, they are 10 inch blades and the side arms are both 60 inches. The serial number is 366."

This item can be picked up in the Arizona, or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

David-AZ-2-19-11

MV-Sold-6-12-14    Return Home

**Reduced**Item # UFE-1251   $795

Full Image

Dewalt 12" Compound Mitre Saws w/ Phaedra Miter-Grid

This machine is in Excellent Working Condition.

Dewalt 12" Saws / Phaedra Measuring System with Stand as shown.

See page #120 for Current Information

From the seller: "The DeWalt is a DW705 12" compound miter saw with two sets of blades. The Phaedra Quadrant Professional Mitering System and the saw are about six years old and I have the manuals."

This item can be picked up in the Arizona, or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

David-AZ-2-19-11

JP-Sold-2-8-12   Return Home

   Item # UFE-1252   $900

Full Image

Pistorius Model VN-B

This Pistorius Model VN-B pneumatic joiner / underpinner Good Working condition.

From The Seller: "The Pistorius Pneumatic V undernailer, Model VN-B Serial # 237236 is great, hate to sell it. Well maintained used, small rust spots, but works great, no problems"

Serial # 237236

The following is information from manufacturer's website: 

There may have been some changes from this model to current model. Manufacturer's website display information for the newest model available. 

V-NailŪ: MODELS VN-S AND VN-B
V-NailŪ Frame Assembly Machines

The models VN-S and VN-B are designed for low to medium production where compressed air is available. This series of machines is available in both bench and floor models to meet individual space, operational and budgetary requirements. Designed primarily for the low to medium volume frame shop, these models include the most desirable features for custom framing.

Features:

• Extra heavy duty steel construction.
  
  Available as a bench or free standing floor model.
  
  Magazine holds 250 V-NailŪ brand fasteners.
   
• Fastener is inserted into the base of the moulding for blind joining. No nail hole filling or puttying is necessary.
  
  Modular component design makes for easy in-house maintenance and repairs.
  
  Optional fences for hexagon or octagon frames are available.
  
  Available with optional glue dispenser.
  
  Joins large or small moulding profiles with ease.
  
  Powerful pneumatic rabbet or inside clamp pulls mitered faces tightly together prior to fastening.
  
  Top hold down device is designed to even up the faces of the two pieces being joined.
  
  Optional tilting fences available.

This item can be picked up in the Hawaii, or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Bob-HI-11-19-11

Sold - Bob 2-28-11   Return Home