Used Framing Equipment:  Mat Cutters, Moulding Cutting & Joining Equipment, Mounting Presses, Hand Tools

We buy & sell pre-owned picture framing equipment. We also help you to sell your used framing equipment, and help you save on equipment that you may need. All Items are sold "As Is".  Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to crosscheck information with seller or manufacturer regarding descriptions that appear in this catalog.

Do you have Questions?  Feel free to call our office at 330-405-9421 or email us at info@skylinepictures.com

                      Pre-owned Framing Equipment     page 180   

Section 2: Frame Moulding Cutting, Joining Equipment, Miter Saws (Note: newest listings appear on latter pages)

Skip to Page:  #1 -  #2  -  #3  -  #4  #5 -  #6 -  #7 -  #8 -  #9  #10 -  #11  #12  #13 -  #14 -  #15 -  #16 -  #17 -  #18 - #19 -  #20  -  #21 -  #22 -  #23  #24  #25 - 

#26 -#27  #28  #29  #30 -  #31 -  #32 -  #33  #34 -  #35 -  #36  #37  #38 -  #39 -  #40 -  #41  #42 -  #43 #44 -  #45  #46  #47 -  #48  #49 -  #50 -  #51 - 

#52  #53 -  #54 -  #55 -  #56  #57  #58  #59  #60 -  #61 -  #62-  #63 #64-  #65 #66 #67 #68-  #69 #70-  #71-  #72 #73-  #74-  #75 #76-  #77-  #78 - #79 -#80 -

-#81 -#82 -#83 -#84  -#85 -#86 -#87 -#88 -#89 -#90 -#91 -#92 -#93 -#94 -#95 -#96 -#97 -#98 -#99 -#100 -#101 -#102 -#103 -#104 -#105 -#106 -#107 -#108 -#109 -

#110 -#111 -#112 -#113 -#114 -#115 -#116 -#117 -#118 -#119 -#120 -#121 -#122 -#123 -#124 -#125 -#126 -#127 -#128 -#129 -#130 -#131 -#132 -#133 -#134 -#135 -#136 -#137 -#138 -#139 -

#140 -#141 -#142 -#143 -#144 -#145 -#146 -#147 -#148 -#149 -#150 -#151 -#152 -#153 -#154 -#155 -#156 -#157 -#158 -#159 -#160 -#161 -#162 -#163 -#164 -#165 -#166 -#167 -#168 -#169

-#170 -#171 -#172 -#173  -#174  -#175 -#176 -#177 -#178 -#179 -#180 -#181 -#182 -#183 -#184 -#185 -#186 -#187 -#188 -#189 -#190 -#191 -#192 -#193 -#194 -#195 -#196 -#197 -#198 -#199

-#200-#201 -#202 -#203 -#204 -#205 -#206 -#207 -#208  -#209 -#210 -#211 -#212 -#213 -#214 -#215 -#216 -#217 -#218 -#219 - #220  -#221- #222-#223-#224-#225-#226-#227-#228-#229-#230-

-#231-#232-#233-#234-#235-#236-#237-#238-#239-#240-#241-#242-#243-#244-#245-#246-#247-#248-#249 -#250-#251-#252-#253-#254-#255-#256-#257-#258-#259-#260-#261-#262-#263

-#264-#265-#266-#267-#268-#269-#270-#271-#272-#273-#274-#275-#276-#277-#278-#279-#280-#281-#282-#283-#284-#285-#286-#287-#288-#289-#290-#291-#292-#293

-#294-#295-#296-#297-#298-#299-#300-#301-#302-#303-#304-#305

All Items On This Page are Sold - See Latter Pages For Newest Listings

 ***Reduced***Item # UFE-1178   $475

Full Image

Jyden Chopper

Foot Operated - Model

This is in Good Condition. Comes with 60" extended rail.

This item can be picked up in the California, or palletized & shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Howard-CA-11-2-10 $500 / 8-16-12 $475 s

See Page #283 for Current Information        Return Home

 

 ***Reduced***Item # UFE-1183   $375

Full Image

Jyden Chopper

Foot Operated - Model

This chopper is in Working Condition. Comes with 60" extended rail and an extra set of blades..

This item can be picked up in Colorado, or palletized & shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Jay-CO-11-13-10 $400 / 1-24-12 $399 / 8-16-12 $375 s

See Page #283 for Current Information        Return Home

 

Item # UFE-1202   $ Call for Pricing

Full Image

Clearmount Miter-Grid

This measuring system is in Very Good Condition.

Clearmount Measuring System as shown.

Saw is not included.

This item can be picked up in the North Carolina, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Larry&Lois-NC-12-27-10 $850 / 1-25-12 $750 / 8-16-12 $695 s

See Page #277 for Current Information    Return Home

List Price $265

***Reduced***Item # UFE-1215   $120

Full Image

Frame Square Fillet Cutter / Trimmer

This unit is in Good Condition.

Precision Fillets / Trim Cutter for Fillets

 

 

This item can be picked up in the New York, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Jim-NY-1-27-11 $130 / 1-25-12 $125 / 8-16-12 $120 s

 Sold-7-16-13-Jim    Return Home

 

***Reduced***Item # UFE-1227   $2,895

Full Image

CTD D45A Double Miter Saw

This machine is in Good Working Condition. This machine has been well maintained. It is currently used to cut wood.

Below is information from Manufacturer's Website. Check with Tech Support for any differences between what is being sold and the newer generation machines.

 

From Manufacturer's Website:

 

CTD D45AX Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

 

Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD

 

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

  

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

  

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

  

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

  

Table Height: 34-1/2 (88cm) from floor.

  

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

 

  • Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
     
  • Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
     
  • Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
     
  • Actuation: Pneumatic foot valve with cover
     
  • Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
     
  • Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

This item can be picked up in California or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Joseph-CA-2-4-11 $3,350 / 1-25-12 $2,995 / 8-16-12 $2,895 s

See Page #203 for Current Information    Return Home

 

***Reduced***Item # UFE-1229   $2,895

Full Image

CTD D45A Double Miter Saw

This machine is in Good Working Condition. This machine has been well maintained. It is has a 14" blade and is currently used to cut wood & polystyrene mouldings..

Below is information from Manufacturer's Website. Check with Tech Support for any differences between what is being sold and the newer generation machines.

 

From Manufacturer's Website:

 

CTD D45AX Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

 

Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD

 

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

  

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

  

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

  

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

  

Table Height: 34-1/2 (88cm) from floor.

  

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

 

  • Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
     
  • Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
     
  • Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
     
  • Actuation: Pneumatic foot valve with cover
     
  • Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
     
  • Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

This item can be picked up in California or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Joseph-CA-2-4-11 $3,350 / 1-25-12 $2,995 / 8-17-12 $2,895 s

See Page #204 for Current Information    Return Home

wpe3F.jpg (1396 bytes)Click Arrow For Next Page

RETURN TO FRAMING EQUIPMENT

CLICK HERE FOR AIM's CATALOG INDEX OF SKYLINE, STADIUM, AND SPORTS PRINTS - WHOLESALE SUPPLIER TO GALLERIES AND FRAME SHOPS 

We Accept: Visa/MasterCard/Discover/Debit/Certified Check or Money Order

 Produced By: A.I.M. Enterprises, Inc. Phone: 330-405-9421
© Copyright 2015 All rights in all media reserved.

 

Pistorius Precision Mitre Chopper, Mitre-Mite VN-4L Underpinner V-nailer Frame Assembly Machine, Frame Square Fillet Trim Chopper Cutter Trimmer, Ingersoll Rand Air Compressor, Fillet Trim Chopper Cutter Trimmer, Jyden Chopper with extra blades For Sale, Buy Used Framing Frame Shop Equipment Store, Selling Sell Your Framing Equipment, Buy Used Framing Equipment, Discount Framing Equipment, AIM Enterprises Inc Dealer Distributor Supplier of Used Framing Equipment Phone 330-405-9421