Item # UFE-1679   $1,895

Full Image

Taurus 292DE Frame Joiner

This is a programmable pneumatic underpinner.

This is in Good Working Condition.

"From the seller: The 292DE is complete and functional.  It includes a new Allen Bradley  controller and software.”

This item can be picked up in Colorado or shipped for an additional fee by freight company. Shipping is not the $6.50 default on the order page.

David-CO-6-28-12/662

See Page #308 for Current Information  Return Home

Item # UFE-1680   $ Not Yet Priced

Full Image

Taurus Frame Joiner

This is a programmable pneumatic underpinner

This is in Good Condition. This machine can be rebuilt or used for parts. This machine needs additional parts to make it operational.

"From the seller: v-nailer is missing the clamp post and  horizontal  arm that holds the clamp post .  If someone was interested in a complete machine  I could  fabricate a simple clamp  similar to a AMP machine.”

This item can be picked up in Colorado or shipped for an additional fee by freight company. Shipping is not the $6.50 default on the order page.

David-CO-6-28-12/662

See Page #308 for Current Information  Return Home

Item # UFE-1681   $ Not Yet Priced

Full Image

Taurus Frame Joiner

This is a programmable pneumatic underpinner

This is in Good Condition. This machine can be rebuilt or used for parts. This machine needs additional parts to make it operational.

"From the seller: v-nailer is missing the clamp post and  horizontal  arm that holds the clamp post .  If someone was interested in a complete machine  I could  fabricate a simple clamp  similar to a AMP machine.”

This item can be picked up in Colorado or shipped for an additional fee by freight company. Shipping is not the $6.50 default on the order page.

David-CO-6-28-12/662

See Page #308 for Current Information  Return Home

Item # UFE-1682   $2,295

Full Image

Pistorius MN-200 Double Miter Saw

This machine is in Good Working Condition.

Includes 8 ft fence and spare parts

This item can be picked up in Colorado or shipped for an additional fee by freight company. Shipping is not the $6.50 default on the order page.

David-CO-6-28-12/662

See Page #301 for Current Information  Return Home

Item # UFE-1683   $7,195

Full Image

OMGA 313 Double Miter Saw

This machine is in Good Working Condition.

This is a great high volume machine. Has hopper, electronic eye and measuring gauge

This machine will cut approximately 3 1/8" W x 4" H

This item can be picked up in Missouri or shipped for an additional fee by a freight company. Shipping is not the  $6.50 default on the order page.

John-MO-6-28-12/657

See Page #309 for Current Information  Return Home

***Reduced***Item # UFE-1286   $1,475

Full Image

CTD D45 Double Miter Saw

This machine is in Good Working Condition. This machine has been well maintained.

From Manufacturer's Website:

CTD D45 Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

Table Height: 34-1/2 (88cm) from floor.

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

• Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
   
• Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
   
• Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
   
• Actuation: Pneumatic foot valve with cover
   
• Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
   
• Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

This item can be picked up in Washington or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Kyoshi-WA-3-16-11 $1,500 / 6-29-12 $1,475 s

See Page #310 for Current Information    Return Home