List Price w/ Options $11,675 +

*** Reduced***Item # UFE-1684   $2,495

Full Image

Pistorius MN-200 Double Miter Saw

This machine is in Good Condition.

"From the Seller:  8 Foot In feed with support stand. Material hold down clamps. Model MN-200 for wood, aluminum, plastics and fiberglass. Very Good condition 2-5/8" max. Height & 3- 5/16" max. width cap (2) 1.5 HP, 230/460V. 3,450 RPM Motors
12" diameter blade capacity with two additional wood blades. 5/8" diameter belt driven saw arbors. Non-staggered blade movement -- not for notching, only approx. 7" of travel necessary to complete the stroke of the saw blades
Simultaneously cuts a left and right 45 degree miter with each cycle of the machine thus wasting little material. Leaves hands free to hold the material. The counterbalanced saw heads return automatically. The saw blades extend beyond the fence line when cycling, cutting completely through the material. Foot pedal operated, actuated by air
Scrap discharges to the bottom of the machine in a box Air filter, regulator, and lubricator
Magnetic push button starters

This item can be picked up in Kentucky or shipped for an additional fee by freight company. Shipping is not the $6.50 default on the order page.

Pat-KY-7-2-12

Sold-10-13-14-Pat  Return Home

List Price w/ Options $11,675 +

*** Reduced***Item # UFE-1494   $2,695

Full Image

Pistorius MN-200 Double Miter Saw

This machine is in Good Condition

"From the Seller:

This item can be picked up in Georgia or shipped for an additional fee by freight company. Shipping is not the $6.50 default on the order page.

Alan-GA-12-9-11 $2,750 / 7-2-12 $2,695 s

Sold-8-27-12-Alan  Return Home

List Price w/ Options $11,675 +

*** Reduced***Item # UFE-1495   $4,595

Full Image

Pistorius MN-300 Double Miter Saw

This machine is in Good Condition

"From the Seller: Used Pistorius Model #MN/300 Heavy Duty Double Miter Saw machine, Pivot Type machine, 208 volt, 3-phase machine. Perfect Machine for the window and picture frame industries."

This item can be picked up in California or shipped for an additional fee by freight company. Shipping is not the $6.50 default on the order page.

Charles-CA-12-9-11 $4,675 / 7-2-12 $4,595 s

See Page #301 for Current Information  Return Home

List price $522+

Item # UFE-1685   $95

Full Image

Pneumatic Point Driver

This unit is Good Condition

This item can be picked up in Kentucky or shipped for an additional fee by UPS. Shipping is not the $6.50 default found in the shopping cart.

Ken-KY-7-5-12/654

Sold-8-7-12-Ken   Return Home

"Open To Offers"

List $70,000 +

***Reduced***Item # UFE-1259   $13,995

Full Image

OMGA V235 NC V Cutting Machine System

Double Miter Saw Model V235 NC System

This machine / system is in  Very Good Working Condition.

Power:  50HZ  / 400volts

The V235 NC is a high speed precision mitre saw for the picture frame, joinery and furniture industries. It is fitted with an on board computer enabling it to operate in various cutting modes. The machine is able to cut from random lengths of material and can also optimize the cutting sequence in its list mode.  The computer is fitted with an 8 inch visual display unit which allows the data that the operator requires to be constantly displayed. Programs can be written and edited on the machine or can be downloaded from an office PC via a 3.5 floppy disc. It is possible to interrupt the cutting process at any time and have a different program carried out whilst all the data relating to the first program remains stored. Error messages are displayed on screen reducing downtime. The machine is fitted with a choice of either a 3000mm capacity vertical hopper feed system or a 3000mm horizontal feed system, an outfeed conveyor belt with a pneumatic sequence kicker is also fitted as standard in order not to damage the cut components and to separate the tail end waste pieces.  Specification Twin blade cutting station with 3 hp motor 2 x 350mm diameter TCT sawblades 85mm cutting width capacity Pneumatic blade stroke with speed adjustment  Vertical or Horizontal feed magazine 3000mm capacity Outfeed conveyor with photocell and kicker

This item can be picked up in New Zealand, or shipped for an additional fee by a Crate & Freight company. Shipping is not the $6.50 default found in the shopping cart.

John-NZ-3-1-11 $29,995 / 2-8-12 $28,995 / 5-24-12 $14,995 / 7-10-12 $13,995

JP-Sold-8-22-12   Return Home

"Open To Offers"

List $ 110,000 +

***Reduced***Item # UFE-1260   $18,995

Full Image

Cassese FB5021 robotic tab machine

This machine / system is in  Very Good Working Condition.

Power:  50HZ  / 400volts

It is always a good idea to contact the manufacturer to determine the differences between the newer generation machine and what is being offered here.

 

From the Manufacturer's Site: Newest Generation: Cassese FB7000 Automatic Fastening machine has been especially designed for the customs & contract framers. AUTOMATIC BACK FIXING MACHINE The FB7000 is designed to automatically secure backings and standbacks into frames with 15mm & 25mm and U-Shape staples. Velocity and flexibility for small and big series : The machines takes by itself the internal and external dimensions of the frame within a few seconds, without human intervention. Change over is from 30 seconds up to 45 seconds (for the biggest sizes). This velocity and flexibility makes it ideal and extremely productive even for small batches from 20 frames. Website: http://www.cassese.com/eng/cassese_back_fixing_machine.html#stop01

This item can be picked up in New Zealand, or shipped for an additional fee by a Crate & Freight company. Shipping is not the $6.50 default found in the shopping cart.

John-NZ-3-1-11 $29,995 / 2-8-12 $28,995 / 5-24-12 $19,995 / 7-10-12 $18,995

JP-Sold-8-22-12   Return Home