Item # UFE-1811   $1,875

Full Image

CTD D45 Double Mitre Saw

This machine is in Good Condition.

Includes pneumatic hold downs, new controller, in-feed table and simple measuring gauge.

This item can be picked up in Oregon or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Louis-OR-11-6-12/793

MV-Sold-11-9-12  Return Home

Item # UFE-1812  $999

Full Image

Cassese CS89 Frame Joiner

This unit is in Good Condition.

Includes extra cartridges

This item can be picked up in Oregon or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Louis-OR-11-6-12/793

JP-Sold-12-17-12  Return Home

Item # UFE-1813   $750

Full Image

 Morso Chopper

This unit is in Good Condition.

Includes measuring table and 1 set of sharpened blades

This item can be picked up in Oregon or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Louis-OR-11-6-12/793

Sold-8-27-13-Louis  Return Home

Item # UFE-1814   Saw  $4,750

Item # UFE-1814a  Accu-gage Stops $1,100

Item # UFE-1814b   Saw and stops $5,850

Full Image

Pistorius MN-300 Double Mitre Saw

This machine is in Good Condition.

Additional Options:  96' measuring gauge and Accu-gage stops.

This item can be picked up or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Todd-WM-11-6-12/795

  Sold-3-26-19-Todd  Return Home

Item # UFE-1815  $1,995

Full Image

Fletcher 5700 Corner Pro V-Nailer

Fletcher V-Nail Frame Assembly Machine

This machine is in Very Good Condition.

Purchased New in 2007

  Serial # 1870

Support wings are included.

"From the Seller: Excellent working condition.  Cosmetic condition as pictured.     It was last serviced professionally a couple of years ago."

This item can be picked up in New York or shipped for an additional fee by UPS. Shipping is not the $6.50 default found in the shopping cart.

Benjamin-NY-11-7-12/798

Sold-12-3-12-Benjamin  Return Home

***Reduced***Item # UFE-1227   $2,595 Or Make Offer

Full Image

CTD D45A Double Miter Saw

This machine is in Good Working Condition. This machine has been well maintained. It is currently used to cut wood.

Below is information from Manufacturer's Website. Check with Tech Support for any differences between what is being sold and the newer generation machines.

From Manufacturer's Website:

CTD D45AX Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

Table Height: 34-1/2 (88cm) from floor.

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

• Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
   
• Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
   
• Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
   
• Actuation: Pneumatic foot valve with cover
   
• Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
   
• Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

This item can be picked up in California or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Joseph-CA-2-4-11 $3,350 / 1-25-12 $2,995 / 8-16-12 $2,895 / 11-13-12 $2,595 s

See Page #310 for Current Information    Return Home