Item # UFE-1283   $ 1,200

Full Image

Jyden Chopper

Foot Operated - Model

This chopper is in Good Working Condition. Comes with 60" extended rail.

This item can be picked up in Canada, or palletized & shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Paul-Canada-3-15-11

No Longer Available   Return Home

List Price $6, 095 (with dust collector)

Item # UFE-1284   $500

Full Image

Pistorius D20R ComDouble Miter Saw

This machine is in good condition.

Comes with Extension Arm, Dust Collector

Model: BM-S  /  12" Blades

This item can be picked up in Canada or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Paul-Canada-3-15-11

No Longer Available  Return Home

List $1500

Item # UFE-1285   $500

Full Image

Air Boss Air Compressor

It is in Very Good Working Condition.

This item can be picked up in Canada, or shipped for an additional fee by common carrier. Shipping is not the $6.50 default on the order page.

Paul-Canada-3-15-11

No Longer Available  Return Home

***Reduced***Item # UFE-1286   $1,500

Full Image

CTD D45 Double Miter Saw

This machine is in Good Working Condition. This machine has been well maintained.

From Manufacturer's Website:

CTD D45 Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

Table Height: 34-1/2 (88cm) from floor.

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

• Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
   
• Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
   
• Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
   
• Actuation: Pneumatic foot valve with cover
   
• Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
   
• Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

This item can be picked up in Washington or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Kyoshi-WA-3-16-11

See Page #162 for Current Information    Return Home

Item # UFE-1288   $ 7,995

Full Image

Cassese CS939 MA Double Miter Saw w/ Dust Collector

This saw is in Good Condition; comes with fences, a set of blades already attached, and an extra set of blades.

Manufactured: 2003

.From Manufacturer's / Distributor's Website:

Can cut up to 5" wide mouldings

Fast: up to 350 to 450 chops/hour can be cut

Machine Demo:  http://www.youtube.com/watch?v=sxusH0hhg0c

Technical Detail: http://www.activesalesco.com/ca939saws.htm

 This item can be picked up in Vermont or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Matt-VT-3-16-11

JP-Sold 8-30-11     Return Home