Item # UFE-1223   $ 1,100

Full Image

Jyden Chopper

Foot Operated - Model

This chopper is in Very Good Condition. Comes with 60" extended rail

This item can be picked up in Georgia, or palletized & shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Beth/Jeff GA-2-1-11

JP-Sold  2-8-11         Return Home

List $3,400

Item # UFE-1224  $ 795

Full Image

Morso-F Chopper

This unit is in Good Working Condition. Included: a 60" extended measuring rail with support stand.

Serial # 19,260   Manufactured: 1977

This item can be picked up in New York, or shipped for an additional fee by with a crating & freighting company. Shipping is not the $6.50 default on the order page.

Elizabeth-NY-2-4-11

JP-Sold  2-8-11   Return Home

$11,750 + List Price

Item # UFE-1225   $ 1,695

Full Image

ITW AMP VN4+MP

ITW AMP VN4+MP Programmable Electronic Production V-Nail Frame Assembly Machine

This unit is in Working Condition.

Manufactured:

Weight: 275 lbs.

This item can be picked up in Wisconsin or shipped for an additional fee by a freight company. Shipping is not the $6.50 default on the order page.

Fred-WI-2-4-11

JP-Sold  2-8-11     Return Home

List $8600 +

Item # UFE-1226  $1,750  Sold-1-23-12-Fred 

Item # UFE-1226b  $1,995  Sold-1-23-12-Fred 

Full Image

Brevetti C-16

This saw is in working condition and comes with a set of blades and measurement arm.

Below is information from Manufacturer's Website. Check with Tech Support for any differences between what is being sold and the newer generation machines.

Features:

• Durable, functional unit designed specifically for volume production of high quality output with speed and efficiency.
• Cuts molding up to 3 1/2" wide by 4" high
• Two Right and one left moulding support arms
• Includes two high quality 350 mm, 108 tooth blades from Tenryu, manufacturer of industrial saw blades for 100 years. (100 tooth blades optional)
• Onboard air filtration
• Measuring system attached to support arms
• Vertical pneumatic clamps
• Timing mechanism for clamp release
• Hand or foot operated mechanism as specified
• 2 right sliding stops
• Waste support with automatic pneumatic removal
• Quick and easy adjustment between profiles
• Equipped for external dust collection system
• Full Visibility while cutting
• Ergonomically friendly design

Specifications:

• (2) 350mm (13 3/4") saw blades/ bore 32mm(1 1/4")/108 tooth
• (2) 2HP 220V/60Hz three phase motors
• (3) 39 3/8" molding support arms (1 left, 2 right)
• 40" measuring scale
• 800-1000 cuts per hour
• Air Filter system
• Vertical cutting head and motion
• Waste support block with automatic air actuated removal device
• Waste Disposal Chute
• Pneumatic and Electrical Safety Switches

Return Home

***Reduced***Item # UFE-1227   $3,350

Full Image

CTD D45A Double Miter Saw

This machine is in Good Working Condition. This machine has been well maintained. It is currently used to cut wood.

Below is information from Manufacturer's Website. Check with Tech Support for any differences between what is being sold and the newer generation machines.

From Manufacturer's Website:

CTD D45AX Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

Table Height: 34-1/2 (88cm) from floor.

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

• Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
   
• Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
   
• Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
   
• Actuation: Pneumatic foot valve with cover
   
• Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
   
• Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

See page #119 for Current Information

This item can be picked up in California or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Joseph-CA-2-4-11

Order This Item    Return Home

***Reduced***Item # UFE-1228   $3,350

Full Image

CTD D45A Double Miter Saw

This machine is in Good Working Condition. This machine has been well maintained. It is currently used to Polystyrene Mouldings.

Below is information from Manufacturer's Website. Check with Tech Support for any differences between what is being sold and the newer generation machines.

From Manufacturer's Website:

CTD D45AX Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

Table Height: 34-1/2 (88cm) from floor.

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

• Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
   
• Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
   
• Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
   
• Actuation: Pneumatic foot valve with cover
   
• Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
   
• Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

See page #119 for Current Information

This item can be picked up in California or shipped for an additional fee by common carrier. Shipping is not the $6.50 default found in the shopping cart.

Joseph-CA-2-4-11

Order This Item    Return Home